dmesg - LAME MP3 Encoding

Return To LAME MP3 Encoding System Information

microcode: microcode updated early to revision 0xd6, date = 2020-04-23
Linux version 5.4.0-40-generic (buildd@lcy01-amd64-011) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #44-Ubuntu SMP Tue Jun 23 00:01:04 UTC 2020 (Ubuntu 5.4.0-40.44-generic 5.4.44)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000062d3efff] usable
BIOS-e820: [mem 0x0000000062d3f000-0x0000000062d3ffff] ACPI NVS
BIOS-e820: [mem 0x0000000062d40000-0x0000000062d40fff] reserved
BIOS-e820: [mem 0x0000000062d41000-0x000000007a48dfff] usable
BIOS-e820: [mem 0x000000007a48e000-0x000000007ae7dfff] reserved
BIOS-e820: [mem 0x000000007ae7e000-0x000000007ce7dfff] ACPI NVS
BIOS-e820: [mem 0x000000007ce7e000-0x000000007cefdfff] ACPI data
BIOS-e820: [mem 0x000000007cefe000-0x000000007cefefff] usable
BIOS-e820: [mem 0x000000007ceff000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: LENOVO 80WK/LNVNB161216, BIOS 4KCN40WW 10/17/2017
tsc: Detected 2500.000 MHz processor
tsc: Detected 2499.952 MHz TSC
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x27f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0080000000 mask 7F80000000 uncachable
  1 base 007E000000 mask 7FFE000000 uncachable
  2 base 007D800000 mask 7FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x7ceff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x142001000, 0x142001fff] PGTABLE
BRK [0x142002000, 0x142002fff] PGTABLE
BRK [0x142003000, 0x142003fff] PGTABLE
BRK [0x142004000, 0x142004fff] PGTABLE
BRK [0x142005000, 0x142005fff] PGTABLE
BRK [0x142006000, 0x142006fff] PGTABLE
BRK [0x142007000, 0x142007fff] PGTABLE
BRK [0x142008000, 0x142008fff] PGTABLE
BRK [0x142009000, 0x142009fff] PGTABLE
RAMDISK: [mem 0x3217d000-0x350b5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x000000007CECC188 000104 (v01 LENOVO CB-01    00000001      01000013)
ACPI: FACP 0x000000007CEEE000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DSDT 0x000000007CED5000 015BCF (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: FACS 0x000000007CE4D000 000040
ACPI: UEFI 0x000000007CEFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: UEFI 0x000000007CEFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: MSDM 0x000000007CEFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CEF9000 0004C3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CEF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: TPM2 0x000000007CEF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CEF3000 0030A0 (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: ASF! 0x000000007CEF2000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: ASPT 0x000000007CEF1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: BOOT 0x000000007CEF0000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DBGP 0x000000007CEEF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: HPET 0x000000007CEED000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: APIC 0x000000007CEEC000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: MCFG 0x000000007CEEB000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: LPIT 0x000000007CED4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: WSMT 0x000000007CED3000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CED2000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CED1000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CECD000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CECB000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DBGP 0x000000007CECA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DBG2 0x000000007CEC9000 000054 (v00 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CEC8000 0002F5 (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CEC7000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: SSDT 0x000000007CEC2000 0049A2 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: DMAR 0x000000007CEC1000 0000A8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: FPDT 0x000000007CEC0000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027effffff]
NODE_DATA(0) allocated [mem 0x27efd5000-0x27effffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000027effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x0000000062d3efff]
  node   0: [mem 0x0000000062d41000-0x000000007a48dfff]
  node   0: [mem 0x000000007cefe000-0x000000007cefefff]
  node   0: [mem 0x0000000100000000-0x000000027effffff]
Zeroed struct page in unavailable ranges: 27606 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
On node 0 totalpages: 2069546
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 7763 pages used for memmap
  DMA32 zone: 496781 pages, LIFO batch:63
  Normal zone: 24512 pages used for memmap
  Normal zone: 1568768 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0x7e000000-0x7fffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x62d3f000-0x62d3ffff]
PM: Registered nosave memory: [mem 0x62d40000-0x62d40fff]
PM: Registered nosave memory: [mem 0x7a48e000-0x7ae7dfff]
PM: Registered nosave memory: [mem 0x7ae7e000-0x7ce7dfff]
PM: Registered nosave memory: [mem 0x7ce7e000-0x7cefdfff]
PM: Registered nosave memory: [mem 0x7ceff000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 2037186
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7986552K/8278184K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 291632K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 44488 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007ad72000 end: 0x0000007ad91fff
DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.90 BogoMIPS (lpj=9999808)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (19999.61 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x62d3f000-0x62d3ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7ae7e000-0x7ce7dfff] (33554432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 16:53:21, date: 2020-07-04
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1593881601.040:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DEEF52C1800 0005EE (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DEEF4F24400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DEEF52C1000 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DEEF4D4B600 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa4410000-0xa441ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xa442a000-0xa442afff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa442b000-0xa442bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa4428000-0xa4429fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa442e000-0xa442e0ff]
pci 0000:00:17.0: reg 0x18: [io  0x5080-0x5087]
pci 0000:00:17.0: reg 0x1c: [io  0x5088-0x508b]
pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xa442c000-0xa442c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xa4424000-0xa4427fff]
pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xa4420000-0xa4423fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xa4400000-0xa440ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa442d000-0xa442d0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0x5040-0x505f]
pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: Enabling HDA controller
pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa3ffffff]
pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:02:00.0: [1217:8621] type 00 class 0x080501
pci 0000:02:00.0: reg 0x10: [mem 0xa4301000-0xa4301fff]
pci 0000:02:00.0: reg 0x14: [mem 0xa4300000-0xa43007ff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xa4300000-0xa43fffff]
pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xa4000000-0xa41fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [mem 0xa4000000-0xa41fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:04:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xa4200000-0xa42fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x62d3f000-0x63ffffff]
e820: reserve RAM buffer [mem 0x7a48e000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7ceff000-0x7fffffff]
e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0680-0x069f] has been reserved
system 00:02: [io  0xffff] has been reserved
system 00:02: [io  0xffff] has been reserved
system 00:02: [io  0xffff] has been reserved
system 00:02: [io  0x1800-0x18fe] has been reserved
system 00:02: [io  0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io  0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN2b96 PNP0f03 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0x80000000-0x8001ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa3ffffff]
pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xa4300000-0xa43fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [mem 0xa4000000-0xa41fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xa4200000-0xa42fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa3ffffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff]
pci_bus 0000:03: resource 1 [mem 0xa4000000-0xa41fffff]
pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xa4200000-0xa42fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 48356K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x7648e000-0x7a48e000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 122
pcieport 0000:00:1c.0: PME: Signaling with IRQ 123
pcieport 0000:00:1c.0: AER: enabled with IRQ 123
pcieport 0000:00:1c.2: PME: Signaling with IRQ 124
pcieport 0000:00:1c.3: PME: Signaling with IRQ 125
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0x0000000082421cc1, using 8128k, total 8128k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-40-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:00 [mem 0xfdb00000-0xfdffffff]
caller pmc_core_probe+0x7f/0x17f mapping multiple BARs
intel_pmc_core intel_pmc_core.0:  initialized
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x20, revision=0xd6
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (584744323, 581208)->(591818290, -6492759)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c7397aba4b613cce0e4070f289f6e01155c15620'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
battery: ACPI: Battery Slot [BAT0] (battery present)
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 12:342:893
rtc_cmos 00:04: setting system clock to 2020-07-04T16:53:22 UTC (1593881602)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
usb 1-6: new high-speed USB device number 2 using xhci_hcd
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
ahci 0000:00:17.0: version 3.0
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
sdhci-pci 0000:02:00.0: SDHCI controller found [1217:8621] (rev 1)
mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
libphy: r8169: probed
r8169 0000:04:00.0 eth0: RTL8168gu/8111gu, 54:e1:ad:f3:6f:f9, XID 509, IRQ 129
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x4 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
scsi host0: ahci
r8169 0000:04:00.0 enp4s0: renamed from eth0
scsi host1: ahci
scsi host2: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xa442c000 port 0xa442c200 irq 127
usb 1-6: New USB device found, idVendor=04f2, idProduct=b57e, bcdDevice=87.40
usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6: Product: EasyCamera
usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-6: SerialNumber: 0001
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-11: KINGSTON SUV400S37120G, 0C3J96R9, max UDMA/133
ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SUV400S 96R9 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-11: new full-speed USB device number 3 using xhci_hcd
 sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
usb 1-11: New USB device found, idVendor=0cf3, idProduct=e500, bcdDevice= 0.01
usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
fbcon: Taking over console
Console: switching to colour frame buffer device 240x67
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 2495.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa763a3d1, max_idle_ns: 440795313647 ns
clocksource: Switched to clocksource tsc
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4744]
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
psmouse serio1: synaptics: queried min coordinates: x [1272..], y [1108..]
psmouse serio1: synaptics: Your touchpad (PNP: SYN2b96 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
systemd[1]: modprobe@drm.service: Succeeded.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
lp: driver loaded but no devices found
systemd[1]: Finished Load/Save Random Seed.
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x440000, board id: 3287, fw id: 2469908
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core, revision 9289...
systemd[1]: Mounting Mount unit for core, revision 9436...
systemd[1]: Mounting Mount unit for core18, revision 1705...
systemd[1]: Mounting Mount unit for core18, revision 1754...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 116...
systemd[1]: Mounting Mount unit for gnome-3-28-1804, revision 128...
Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 33...
systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36...
systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 145...
systemd[1]: Mounting Mount unit for gnome-system-monitor, revision 148...
systemd[1]: Mounting Mount unit for gog-galaxy-wine, revision 171...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1502...
systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
systemd[1]: Mounting Mount unit for snap-store, revision 454...
systemd[1]: Mounting Mount unit for snap-store, revision 467...
systemd[1]: Activated swap /swapfile.
systemd[1]: Reached target Swap.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Received SIGRTMIN+20 from PID 389 (plymouthd).
systemd[1]: Mounted Mount unit for core, revision 9436.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Mounted Mount unit for core18, revision 1754.
systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 116.
systemd[1]: Mounted Mount unit for core18, revision 1705.
systemd[1]: Mounted Mount unit for gnome-3-28-1804, revision 128.
systemd[1]: Started Journal Service.
systemd-journald[316]: Received client request to flush runtime journal.
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
IPMI message handler: version 39.2
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
ipmi device interface
cfg80211: Loading compiled-in X.509 certificates for regulatory database
mc: Linux media interface: v0.10
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
fb0: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usbcore: registered new interface driver btusb
cryptd: max_cpu_qlen set to 1000
uvcvideo: Found UVC 1.00 device EasyCamera (04f2:b57e)
uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
audit: type=1400 audit(1593881604.238:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=462 comm="apparmor_parser"
audit: type=1400 audit(1593881604.242:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=464 comm="apparmor_parser"
audit: type=1400 audit(1593881604.242:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=464 comm="apparmor_parser"
audit: type=1400 audit(1593881604.242:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=464 comm="apparmor_parser"
audit: type=1400 audit(1593881604.242:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=477 comm="apparmor_parser"
audit: type=1400 audit(1593881604.246:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=478 comm="apparmor_parser"
audit: type=1400 audit(1593881604.250:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=465 comm="apparmor_parser"
audit: type=1400 audit(1593881604.250:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=465 comm="apparmor_parser"
audit: type=1400 audit(1593881604.250:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=465 comm="apparmor_parser"
nvidia: module verification failed: signature and/or required key missing - tainting kernel
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: i915drmfb frame buffer device
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
nvidia-nvlink: Nvlink Core is being initialized, major device number 237
nvidia 0000:01:00.0: enabling device (0006 -> 0007)
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  440.100  Fri May 29 08:45:51 UTC 2020
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  440.100  Fri May 29 08:14:04 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
ath10k_pci 0000:03:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 17aa:0901
ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
nvidia-uvm: Loaded the UVM driver, major device number 235.
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
ath10k_pci 0000:03:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
r8169 0000:04:00.0 enp4s0: Link is Down
ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190816/nsarguments-59)
wlp3s0: authenticate with b0:39:56:d8:6b:69
wlp3s0: send auth to b0:39:56:d8:6b:69 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with b0:39:56:d8:6b:69 (try 1/3)
wlp3s0: RX AssocResp from b0:39:56:d8:6b:69 (capab=0x11 status=0 aid=4)
wlp3s0: associated
ath: EEPROM regdomain: 0x8114
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: DE
ath: Regpair used: 0x37
ath: regdomain 0x8114 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
rfkill: input handler disabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler enabled
rfkill: input handler disabled
PM: suspend entry (deep)
Filesystems sync: 0.010 seconds
rfkill: input handler enabled
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from b0:39:56:d8:6b:69 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 16: no longer affine to CPU1
IRQ 125: no longer affine to CPU1
smpboot: CPU 1 is now offline
IRQ 122: no longer affine to CPU2
IRQ 126: no longer affine to CPU2
IRQ 134: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 124: no longer affine to CPU3
IRQ 127: no longer affine to CPU3
IRQ 132: no longer affine to CPU3
smpboot: CPU 3 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -440446814. Restoring
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: sig=0x906e9, pf=0x20, revision=0x5e
microcode: updated to revision 0xd6, date = 2020-04-23
intel_pstate: Disabling energy efficiency optimization
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
nvidia 0000:01:00.0: Enabling HDA controller
ACPI: EC: event unblocked
sd 2:0:0:0: [sda] Starting disk
ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
usb 1-11: reset full-speed USB device number 3 using xhci_hcd
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: configured for UDMA/133
usb 1-6: reset high-speed USB device number 2 using xhci_hcd
OOM killer enabled.
Restarting tasks ... done.
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
PM: suspend exit
psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4744]
psmouse serio1: synaptics: queried min coordinates: x [1272..], y [1108..]
rfkill: input handler disabled
Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
r8169 0000:04:00.0 enp4s0: Link is Down
wlp3s0: authenticate with b0:39:56:d8:6b:69
wlp3s0: send auth to b0:39:56:d8:6b:69 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with b0:39:56:d8:6b:69 (try 1/3)
wlp3s0: RX AssocResp from b0:39:56:d8:6b:69 (capab=0x11 status=0 aid=3)
wlp3s0: associated
ath: EEPROM regdomain: 0x8114
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: DE
ath: Regpair used: 0x37
ath: regdomain 0x8114 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
PM: suspend entry (deep)
Filesystems sync: 0.035 seconds
rfkill: input handler enabled
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from b0:39:56:d8:6b:69 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
ACPI: EC: interrupt blocked
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
IRQ 16: no longer affine to CPU1
IRQ 125: no longer affine to CPU1
smpboot: CPU 1 is now offline
IRQ 122: no longer affine to CPU2
IRQ 126: no longer affine to CPU2
IRQ 134: no longer affine to CPU2
smpboot: CPU 2 is now offline
IRQ 124: no longer affine to CPU3
IRQ 132: no longer affine to CPU3
smpboot: CPU 3 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -438942804. Restoring
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
intel_pstate: Disabling energy efficiency optimization
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: interrupt unblocked
nvidia 0000:01:00.0: Enabling HDA controller
ACPI: EC: event unblocked
sd 2:0:0:0: [sda] Starting disk
usb 1-6: reset high-speed USB device number 2 using xhci_hcd
ath10k_pci 0000:03:00.0: unsupported HTC service id: 1536
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: configured for UDMA/133
usb 1-11: reset full-speed USB device number 3 using xhci_hcd
OOM killer enabled.
Restarting tasks ... 
mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
done.
PM: suspend exit
psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4744]
psmouse serio1: synaptics: queried min coordinates: x [1272..], y [1108..]
rfkill: input handler disabled
Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
r8169 0000:04:00.0 enp4s0: Link is Down
wlp3s0: authenticate with b0:39:56:d8:6b:69
wlp3s0: send auth to b0:39:56:d8:6b:69 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with b0:39:56:d8:6b:69 (try 1/3)
wlp3s0: RX AssocResp from b0:39:56:d8:6b:69 (capab=0x11 status=0 aid=3)
wlp3s0: associated
ath: EEPROM regdomain: 0x8114
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: DE
ath: Regpair used: 0x37
ath: regdomain 0x8114 dynamically updated by country element
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready

Return To LAME MP3 Encoding System Information